Air handling unit used for Air recirculation and maintaining positive pressure inside operative area. Supply duct connected to LAF and return connected to Return air riser, installed in operating area near floor level which takes back contaminated air to AHU.

Air handling unit system given by us are precisely fabricated using thermal break aluminum extruded section frame structures panel shall be made with outer skin made of PPGI and inner sheet is GI, Aluminium or steel options.

These panels are 25mm or 45mm thick puff insulated in double skin so as to ensure them durable and heat resistance. Drain tray made out of 1.2mm SS304 sheet with outer side aluminium foiled cross linked insulation.

Capacity from 500 CFM to 50000CFM at static pressure of 50 – 250mmwc static pressure. Fan section with DIDW forward / backward curved fan option, 4 to 10 Row Deep Cooling coil.

Where space is constraint and client want to installed LAF and AHU then they can use this compact unit in there operative area.

It is made of single/double skin PCGI/PPGI sheet with cross-linked insulation include backward / forward fan, pre-filter and 3 to 4 Row deep cooling coil.

Capacity ranging from 400 to 3000CFM at 50 to 75mmwc static pressure.

The AHU is used to control the following parameters of the space:
Temperature
Humidity
Air Movement
Air Cleanliness